CCNA 200-105 ICND Interconnecting Cisco Networking Exam


Attend this CCNA 200-105 ICND Interconnecting Cisco Networking Exam will get a Good Score 80% on main Exam

What you will learn

Strong Knowledge on CCNA 200-105 ICND Interconnecting

Strong Knowledge on CCNA 200-105 ICND Interconnecting Cisco

Strong Knowledge on CCNA 200-105 ICND Interconnecting Cisco Networking

Strong Knowledge on CCNA 200-105 ICND Interconnecting Cisco Networking Exam

Description

Sample Questions:

What does the frame-relay interface-dlci command configure?

local DLCI on the subinterface

remote DLCI on the main interface

remote DCLI on the subinterface local

DLCI on the main interface

A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?

Main(config)# interface serial 0/0 Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# no shut

Main(config)# interface serial 0/0 Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# encapsulation ppp Main(config-if)# no shut

Main(config)# interface serial 0/0 Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# encapsulation frame-relay Main(config-if)# authentication chap Main(config-if)# no shut

Main(config)# interface serial 0/0 Main(config-if)#ip address 172.16.1.1 255.255.255.252 Main(config-if)#encapsulation ietf Main(config-if)# no shut

Which command enables IPv6 forwarding on a Cisco router?

ipv6 local

ipv6 host

ipv6 unicast-routing

ipv6 neighbor

The following configuration is applied to a Layer 2 Switch: interface fastethernet 0/4 switchport mode access switchport port-security switchport port-security mac-address 0000.1111.1111 switchport port-security maximum 2 swithcport port-security What is the result of the above configuration being applied to the switch?

A host with a mac address of 0000.1111.1111 and up to two other hosts can connect to FastEthernet 0/4 simultaneously

A host with a mac address of 0000.1111.1111 and one other host can connect to Fast Ethernet 0/4 simultaneously

Violating addresses are dropped and no record of the violation is kept

The switch can send an SNMP message to the network management station

The port is effectively shutdown

In GLBP, which router will respond to client ARP requests?


Subscribe to latest coupons on our Telegram channel.

The active virtual gateway will reply with one of four possible virtual MAC addresses.

All GLBP member routers will reply in round-robin fashion.

The active virtual gateway will reply with its own hardware MAC address.

The GLBP member routers will reply with one of four possible burned in hardware addresses.

What command visualizes the general NetFlow data on the command line?

show ip flow export

show ip flow top-talkers

show ip cache flow

show mls sampling

show mls netflow ip

What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow? (Choose three.)

source IP address

source MAC address egress interface

ingress interface

destination IP address

IP next-hop

What are three benefits of GLBP? (Choose three.)

GLBP supports up to eight virtual forwarders per GLBP group.

GLBP supports clear text and MD5 password authentication between GLBP group members.

GLBP is an open source standardized protocol that can be used with multiple vendors.

GLBP supports up to 1024 virtual routers.

GLBP can load share traffic across a maximum of four routers.

GLBP elects two AVGs and two standby AVGs for redundancy.

English
language